Cam Action Cleat

sku Product SKU:  FPAC-CLEATCAM

This product is used in rope style internal halyard flagpoles. The mounted version is secured onto a 1 1/2" x 3 3/8” aluminum block with two #10-32NC stainless steel pan head screws. Both versions are supplied with two #10-32NC stainless steel mounting screws. Recommended maximum rope diameter is 5/16”

USD 32.5000

Halyard Cover

sku Product SKU:  FPAC-HC

**Special Website Pricing**

Available Finishes
Satin	Clear	Bronze	White	Black

This 1/3” wide by 1” deep aluminum channel is designed to be used with the cleat cover boxes by providing additional protection 5’, 6’, 8’, or 10’ above the cleat box. The 5’, 6’, and 8’ models have an upper & lower hinge assembly and is secured to the pole with six #10-32NC stainless steel pan head screws (included). The 10’ model has upper, middle and lower hinge assemblies and is secured to the pole with nine #10-32NC stainless steel pan head screws (included). Cleat Cover Box sold separately.

NOTE: Shipping is only available for the 5ft and 6ft lengths. The 8ft and 10ft are availble for pick-up in store at our two locations.

USD 201.0000

Cleat Cover Box w/ Padlock

sku Product SKU:  FPAC-CB

Available Finishes
Satin	Clear	Bronze	White	Black

This cleat cover box is made from cast aluminum with stainless steel hinge pins. The design allows for easy installation utilizing the cleat holes to mount the cleat cover box. It comes complete with a padlock. Two extra-long 1/4 – 20NC stainless steel mounting screws are included./span>

USD 225.0000

Cleat Cover Box w/ Cylinder Lock

sku Product SKU:  FPAC-CBC

Available Finishes
Satin	Clear	Bronze	White	Black

This cleat cover box is made from cast aluminum with stainless steel hinge pins. The design allows for easy installation utilizing the cleat holes to mount the cleat cover box. It comes complete with a cylinder lock. Two extra-long 1/4 – 20NC stainless steel mounting screws are included.

USD 212.0000

Cast Nylon Cleat

sku Product SKU:  FPAC-CLP

This cleat comes with two #10-1-1/2” self-tapping mounting screws. The distance between the bolt centers is 1 1/8."

USD 5.9000

Heavy-Duty Cast Aluminum Cleat

sku Product SKU:  FPAC-CLHD

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two 3/8”-16NC stainless steel slotted flat head screws. The total length of the cleat is 14 3/4”. The distance between bolt centers is 4 7/8”.

USD 156.0000

6in Light-Duty Cast Aluminum Cleat

sku Product SKU:  FPAC-CLC6

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two #10-5/8” self-tapping flat head mounting screws. The distance between bolt centers is 1".

USD 8.3000

4 1/2in Light-Duty Cast Aluminum Cleat

sku Product SKU:  FPAC-CLC45

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two #10-5/8” self-tapping flat head mounting screws. The distance between bolt centers is 3/4".

USD 7.8000

9in Standard Cast Aluminum Cleat

sku Product SKU:  FPAC-CL9

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two 1/4"-20NC stainless steel mounting screws. The distance between bolt centers is 2 3/4”.

USD 20.9000

6in Standard Cast Aluminum Cleat

sku Product SKU:  FPAC-CL6

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two 1/4"-20NC stainless steel mounting screws. The distance between bolt centers is 2”.

USD 15.2000

Vertical Mount Pulley Assembly

sku Product SKU:  FPAC-VMP

Available Finishes
Silver	Bronze	White	Black

Cast aluminum construction with a 1-7/16” outside diameter cast nylon pulley on a 1/4" stainless steel axle. Attaches with two 1/4"-20NC stainless steel flat head screws or two stainless steel straps (screws and/or straps not included). The maximum halyard diameter is 5/16”. Not supplied as standard with holes drilled for mounting.

USD 44.0000

Deluxe Pulley & Eyebolt Assembly

sku Product SKU:  FPAC-PULLEYDEL

This product is 4 1/8” overall in length with a 2 3/8” threaded length. The bolt threading is 5/16”-18NC and is stainless steel. The pulley is made of nylon with a maximum halyard diameter of 5/16”. Hex nut, washer, and lock washer are all included.

USD 31.0000

Standard Pulley & Eybolt Assembly

sku Product SKU:  FPAC-PULLEYSTD

3 1/8” overall length with a 1” threaded length. The bolt threading is #8-32NC and is zinc plated steel. The pulley is made of zinc with a maximum halyard diameter of 3/16”. Hex nut, washer, and lock washer are all included.

USD 9.3000

Flagpole Cap

sku Product SKU:  FPTR-FC

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

Cast aluminum construction designed to slip over the top of the flagpole and be secured with three 1/4"-20NC stainless steel set screws. The top of the cap is designed to accept an ornament with a spindle threading of 1/2"-13NC.

USD 34.0000

Pole Top Adapter

sku Product SKU:  FPTR-PTA

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

This adapter is used for mounting a truck that has a spindle threading of 1 1/4" NPT and the pole does not have a threaded top plug installed. The adapter is tapped 1 1/4" NPT and is designed to slip over the top of the pole and is secured by three 1/4"-20NC stainless steel set screws.

USD 86.0000

IH-2 Series (Single Pulley - Revolving - Threaded Style)

sku Product SKU:  FPTR-IHT

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

This truck is cast aluminum with a 1 1/4” NPT threaded spindle which screws into the top of the flagpole where a female fitting has been installed. The top of all trucks are designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The extra large model has stainless steel ball bearings in both upper & lower bearing races. All sizes are supplied with a stainless steel bushing at the cable exit point except the 3” diameter model which has a bronze fitting.

USD 357.0000

IHT-VS Series (Single Pulley - Stationary - Threaded Style)

sku Product SKU:  FPTR-IHTVS

Available Finishes
Silver	Bronze	White	Black

This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the trick housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 2” outside diameter case nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The maximum halyard diameter for this pulley is 5/16”.

USD 140.0000

IH-1 Series (Single Pulley - Stationary - Cap Style)

sku Product SKU:  FPTR-IH-1

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The internal pulley assembly has a 1 1/2” outside diameter cast nylon pulley and the external pulley assembly has a 1 1/2” outside diameter cast nylon pulley for the 3 1/2" truck and 2" outside diameter cast nylon pully for the 3" truck. All are on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16”-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2”-13NC threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. The maximum halyard diameter for this pulley is 5/16”.

USD 102.0000

Fiberglass-2 Series (Double Pulley - Stationary - Threaded Style)

sku Product SKU:  FPTR-FG-2

This truck is molded fiberglass, constructed with 1 1/2” outside diameter nylon pulleys on 1/4" stainless steel axles. Designed to slip into a 3" outside diameter pole top. The truck is hel in place by drilling thru the pole and securing the truck to the pole with screws and locktite. The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC. The maximum halyard diameter for these pulleys is 5/16”.

USD 174.0000

150 Series (Double Pulley - Revolving - Threaded Style)

sku Product SKU:  FPTR-RTS2150

Available Finishes
Silver	Bronze	White	Black

This series truck is cast aluminum, constructed with a 1 15/16” outside diameter cast nylon pulley on 3/8” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/2” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The maximum halyard diameter for these pulleys is 5/16”.

USD 226.0000

Extra Heavy-Duty Series (Double Pulley - Revolving - Threaded Style)

sku Product SKU:  FPTR-XHDT

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

This series truck is cast aluminum, constructed with a 3 7/8” outside diameter aluminum pulleys on 1/2” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 12 3/4” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. The maximum halyard diameter for these pulleys is 3/8”.

USD 1195.0000

HDT2 Series (Double Pulley - Revolving - Threaded Style)

sku Product SKU:  FPTR-HDT-2

Available Finishes
Silver	Bronze	White	Black

This series truck is cast aluminum, constructed with a 3 3/4” outside diameter aluminum pulley on 1/2” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The maximum halyard diameter for this pulley is 3/8”.

USD 324.0000

HDT1 Series (Single Pulley - Revolving - Threaded Style)

sku Product SKU:  FPTR-HDT-1

Available Finishes
Silver	Bronze	White	Black

This series truck is cast aluminum, constructed with a 2 1/2” outside diameter aluminum pulley on 1/2” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The maximum halyard diameter for this pulley is 3/8”.

USD 284.0000

RTS2 Series (Double Pulley - Revolving - Threaded Style)

sku Product SKU:  FPTR-RTS2

Available Finishes
Silver	Bronze	White	Black

This series truck is cast aluminum, constructed with a 1 15/16” outside diameter cast nylon pulley on a 1/4” stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard size for this pulley is 5/16”.

USD 134.0000

RTS1 Series (Single Pulley - Revolving - Threaded Style)

sku Product SKU:  FPTR-RTS1

Available Finishes
Silver	Bronze	White	Black

This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard size for this pulley is 5/16”.

USD 123.0000

RTC2 Series (Double Pulley - Revolving - Cap Style)

sku Product SKU:  FPTR-RTC2

Available Finishes
Silver	Bronze	White	Black

This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4”-20NC on the 1 3/8” and 2” models & 5/16”-18NC on the 2 3/8” diameter model). The top is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard diameter for this pulley is 5/16”.

USD 150.0000

RTC1 Series (Single Pulley - Revolving - Cap Style)

sku Product SKU:  FPTR-RTC1

Available Finishes
Silver	Bronze	White	Black

 

This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4”-20NC on the 1 3/8” and 2” models & 5/16”-18NC on the 2 3/8” diameter model). The top is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard diameter for this pulley is 5/16”.

 

USD 150.0000

OT Series (Single Pulley - Stationary - Cap Style)

sku Product SKU:  FPTR-OT

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

 

 

This series truck is cast aluminum, constructed with pulley 1 1/2” outside diameter on the 2”, 2 3/8”, 2 1/2", and 3 1/2” models; 2” outside diameter on the 2 3/4”, 3”, and 3 1/4” models. All on a 1/4” stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws (one 1/4”-20NC on the 2” diameter model; three 5/16”-18NC on the all other models). The top is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. The maximum halyard diameter for this pulley is 5/16”.

 

USD 40.0000