This spool contains 500ft of 5/16in wire center nylon flagpole halyard.

This spool contains 1,500ft of 3/16in nylon flagpole halyard.

Available Finishes
Silver	Clear	Bronze	White	Black

This high profile ‘Trumpet’ flash collar is generally used with flagpoles where a shoe base is welded to the bottom; however, this collar can be used on standard in-ground flagpole if a high profile look is desired. This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. The wall thickness is .06” and fits a flagpole base diameter of 12”

This 10in diameter satin stainless steel ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.

Made in the U.S.A.

This 25ft Telescoping Flagpole has a convenient flick of a spring release button that extends or retracts the flagpole in seconds. This flagpole comes with polycarbonate swivel rings, enough to allow you to fly two flags at once. Also included is a clear polycarbonate collar that fits around the lowest button on the flagpole to prevent unauthorized raising or lowering of the flagpole. This collar can be secured with a nut and bolt or a small lock (not included). A heavy duty PVC foundation sleeve will also be shipped with this purchase so you have everything you need to get started.

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

The “M” – Winch is gearless and self locking at any point, eliminating the need for a separate break. This direct drive winch provides for rapid raising & lowering of the flag with little effort. This improved design does not require any welding thus avoiding discoloration when an anodized finish is required. No monthly lubrication is needed and this winch system is easily adaptable to existing on-site flagpoles. The winch is inserted into the pole and secured with a stainless tell Bolton the back side of the pole. Winch handle sold separately.

These winches are available for use on flagpoles with a butt diameter of 6” or larger. These gearless winches utilize cast bronze internal brakes which release when a winch handle is inserted and rotational pressure is applied. The winch is locked at any position by removing the handle which engages the brake system. The small size is generally used on flagpoles up to 45’, the large size is used on flagpoles from 50’ thru 80’ and the X-Large size is used on flagpoles higher than 80’. The winch is mounted to the inside of the flagpole with two 5/16”-18NC stainless steel bolts with mounting centers being 3 1/2". Recommended diameters of stainless steel cable are 1/8” or 5/32”.

This 10in diameter mirror finish stainless steel ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.

This 12in diameter satin stainless steel ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.

This spool contains 500ft of 3/8in wire center nylon flagpole halyard.

This 12in diameter mirror finish stainless steel ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.

This spool contains 1,000ft of 3/16in wire center nylon flagpole halyard.

This 8in diameter gold leaf copper ball ornament has a spindle threading of 5/8’’-11NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.

This spool contains 1,000ft of 1/4in wire center nylon flagpole halyard.

Available Finishes
Silver	Clear	Bronze	White	Black

This flash collar has a wall thickness of .06” with an outside diameter of 38”. This flash collar is available for flagpole diameters of 8in – 12in.

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

This series truck is cast aluminum, constructed with a 3 7/8” outside diameter aluminum pulleys on 1/2” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 12 3/4” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. The maximum halyard diameter for these pulleys is 3/8”.

Available Finishes
Silver	Clear	Bronze	White	Black

This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. This flash collar has a wall thickness of .06” with an outside diameter of 16”. This flash collar is available for flagpole diameters of 8in-12in.

This 10in diameter gold leaf copper ball ornament has a spindle threading of 5/8’’-11NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.

This 12in diameter gold leaf copper ball ornament has a spindle threading of 5/8’’-11NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.