Flag Center
Grid View
List View
Sorting: Normal
Sorting: Price Low to High
Sorting: Price High to Low
Sorting: New Arrivals
Sorting: Brand A-Z
Sorting: Brand Z-A
Internal Halyard Door & Frame (Vanguard)
sku
Product SKU:
FPAC-IHDOOR
**Special Website Pricing**
| Available Finishes |
 |
 |
 |
 |
| Silver |
Bronze |
White |
Black |
This Unit is designed for 5” diameter poles and is used with rope style internal halyard systems. Each unit consists of a hinged door mounted to the front of the frame and a cam cleat (optional) mounted to the back of the frame. The entire unit is inserted into the flagpole shaft and secured with eight 1/4”-20NC stainless steel screws. The minimum hole opening is 5 1/2” x 3 1/4". The lock and key are included.
USD
193.0000
Beaded Retainer Ring (66"-158")
sku
Product SKU:
FPAC-RR13-RR36
Butt Dia.
of Pole |
Length of
Ring Needed |
| 13" |
62" |
| 14" |
66" |
| 16" |
74" |
| 18" |
82" |
| 20" |
90" |
| 22" |
98" |
| 24" |
106" |
| 30" |
124" |
| 32" |
132" |
| 34" |
140" |
| 36" |
148" |
Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rigs can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of 1” & 2” diameter nylon balls strung onto 1/8” stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of the retainer ring is measured from outside tips of each thimble.
USD
176.0000
RTC1 Series (Single Pulley - Revolving - Cap Style)
sku
Product SKU:
FPTR-RTC1
| Available Finishes |
|
|
|
|
| Silver |
Bronze |
White |
Black |
This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4”-20NC on the 1 3/8” and 2” models & 5/16”-18NC on the 2 3/8” diameter model). The top is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard diameter for this pulley is 5/16”.
USD
150.0000