Flag Center
Grid View
List View
Sorting: Normal
Sorting: Price Low to High
Sorting: Price High to Low
Sorting: New Arrivals
Sorting: Brand A-Z
Sorting: Brand Z-A
Beaded Retainer Ring (66"-158")
sku
Product SKU:
FPAC-RR13-RR36
Butt Dia.
of Pole |
Length of
Ring Needed |
| 13" |
62" |
| 14" |
66" |
| 16" |
74" |
| 18" |
82" |
| 20" |
90" |
| 22" |
98" |
| 24" |
106" |
| 30" |
124" |
| 32" |
132" |
| 34" |
140" |
| 36" |
148" |
Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rigs can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of 1” & 2” diameter nylon balls strung onto 1/8” stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of the retainer ring is measured from outside tips of each thimble.
USD
176.0000
Internal Halyard Door & Frame (Vanguard)
sku
Product SKU:
FPAC-IHDOOR
**Special Website Pricing**
| Available Finishes |
 |
 |
 |
 |
| Silver |
Bronze |
White |
Black |
This Unit is designed for 5” diameter poles and is used with rope style internal halyard systems. Each unit consists of a hinged door mounted to the front of the frame and a cam cleat (optional) mounted to the back of the frame. The entire unit is inserted into the flagpole shaft and secured with eight 1/4”-20NC stainless steel screws. The minimum hole opening is 5 1/2” x 3 1/4". The lock and key are included.
USD
193.0000
10in Outside Diameter Split High Profile Flash Collar for Flagpole Diameters 2 3/8in - 3in
sku
Product SKU:
FPAC-FCTS10
| Available Finishes |
 |
|
|
|
|
| Silver |
Clear |
Bronze |
White |
Black |
This high profile ‘Trumpet’ flash collar is generally used with flagpoles where a shoe base is welded to the bottom; however, this collar can be used on standard in-ground flagpole if a high profile look is desired. This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. The wall thickness is .06” and fits a flagpole base diameter of 2 3/8" - 3”
USD
238.0000