FREE SHIPPING! On orders of $100 * Some Exceptions Apply *
This solid brass double snap is 4" in length.
This is the most durable clip available. Available in both 3 3/4" and 4 3/4" in length.
This is a great alternative while still be made of stainless steel. Available in 2 3/8" and 2 3/4" in length.
Snap covers are available in gray and brown. Length of 3 1/2" and 4 1/4" are available.
These nylon flag fastener clips are sold two per set and come complete with stainless steel spring clips. The halyard is held firmly in place with a positive lock nylon set screw.
Color
Recommended Halyard Length
$0.50
$0.57
$0.75
This spool contains 1,500ft of 3/16in nylon flagpole halyard.
This spool contains 1,000ft of 1/4in nylon flagpole halyard.
This spool contains 600ft of 5/16in nylon flagpole halyard.
This spool contains 600ft of 3/8in nylon flagpole halyard.
This spool contains 1,000ft of 3/16in wire center nylon flagpole halyard.
This spool contains 1,000ft of 1/4in wire center nylon flagpole halyard.
This spool contains 500ft of 5/16in wire center nylon flagpole halyard.
This spool contains 500ft of 3/8in wire center nylon flagpole halyard.
**Special Website Pricing**
The “M” – Winch is gearless and self locking at any point, eliminating the need for a separate break. This direct drive winch provides for rapid raising & lowering of the flag with little effort. This improved design does not require any welding thus avoiding discoloration when an anodized finish is required. No monthly lubrication is needed and this winch system is easily adaptable to existing on-site flagpoles. The winch is inserted into the pole and secured with a stainless tell Bolton the back side of the pole. Winch handle sold separately.
This handle is designed for the winch of a 5" diameter flagpole equipped with an M-Winch.
This handle is designed for the winch of a 6"-14" diameter flagpole equipped with an M-Winch.
This Lock and Key set are designed for the M-Winch.
This key is for a lock to an M Winch.
Drum Width
These winches are available for use on flagpoles with a butt diameter of 6” or larger. These gearless winches utilize cast bronze internal brakes which release when a winch handle is inserted and rotational pressure is applied. The winch is locked at any position by removing the handle which engages the brake system. The small size is generally used on flagpoles up to 45’, the large size is used on flagpoles from 50’ thru 80’ and the X-Large size is used on flagpoles higher than 80’. The winch is mounted to the inside of the flagpole with two 5/16”-18NC stainless steel bolts with mounting centers being 3 1/2". Recommended diameters of stainless steel cable are 1/8” or 5/32”.
This winch handle is designed to be used with any of the stainless steel winches we sell.
...
FLAG CENTER - WAUWATOSA 2954 NORTH 117TH STREET WAUWATOSA, WISCONSIN 53222 PHONE 414-778-1776 HOURS: 9am-5pm M-F, 9am-Noon SAT
FLAG CENTER - OAK CREEK 7158 SOUTH 13TH STREET OAK CREEK, WISCONSIN 53154 PHONE 414-856-0040 HOURS: 9am-5pm M-F Closed SAT