FREE SHIPPING! On orders of $100 * Some Exceptions Apply *
This truck is molded fiberglass, constructed with 1 1/2” outside diameter nylon pulleys on 1/4" stainless steel axles. Designed to slip into a 3" outside diameter pole top. The truck is hel in place by drilling thru the pole and securing the truck to the pole with screws and locktite. The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC. The maximum halyard diameter for these pulleys is 5/16”.
**Special Website Pricing**
This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The internal pulley assembly has a 1 1/2” outside diameter cast nylon pulley and the external pulley assembly has a 1 1/2” outside diameter cast nylon pulley for the 3 1/2" truck and 2" outside diameter cast nylon pully for the 3" truck. All are on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16”-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2”-13NC threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. The maximum halyard diameter for this pulley is 5/16”.
This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the trick housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 2” outside diameter case nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The maximum halyard diameter for this pulley is 5/16”.
This truck is cast aluminum with a 1 1/4” NPT threaded spindle which screws into the top of the flagpole where a female fitting has been installed. The top of all trucks are designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The extra large model has stainless steel ball bearings in both upper & lower bearing races. All sizes are supplied with a stainless steel bushing at the cable exit point except the 3” diameter model which has a bronze fitting.
This adapter is used for mounting a truck that has a spindle threading of 1 1/4" NPT and the pole does not have a threaded top plug installed. The adapter is tapped 1 1/4" NPT and is designed to slip over the top of the pole and is secured by three 1/4"-20NC stainless steel set screws.
Cast aluminum construction designed to slip over the top of the flagpole and be secured with three 1/4"-20NC stainless steel set screws. The top of the cap is designed to accept an ornament with a spindle threading of 1/2"-13NC.
3 1/8” overall length with a 1” threaded length. The bolt threading is #8-32NC and is zinc plated steel. The pulley is made of zinc with a maximum halyard diameter of 3/16”. Hex nut, washer, and lock washer are all included.
This product is 4 1/8” overall in length with a 2 3/8” threaded length. The bolt threading is 5/16”-18NC and is stainless steel. The pulley is made of nylon with a maximum halyard diameter of 5/16”. Hex nut, washer, and lock washer are all included.
Cast aluminum construction with a 1-7/16” outside diameter cast nylon pulley on a 1/4" stainless steel axle. Attaches with two 1/4"-20NC stainless steel flat head screws or two stainless steel straps (screws and/or straps not included). The maximum halyard diameter is 5/16”. Not supplied as standard with holes drilled for mounting.
This cleat comes with two 1/4"-20NC stainless steel mounting screws. The distance between bolt centers is 2”.
This cleat comes with two 1/4"-20NC stainless steel mounting screws. The distance between bolt centers is 2 3/4”.
This cleat comes with two #10-5/8” self-tapping flat head mounting screws. The distance between bolt centers is 3/4".
This cleat comes with two #10-5/8” self-tapping flat head mounting screws. The distance between bolt centers is 1".
This cleat comes with two 3/8”-16NC stainless steel slotted flat head screws. The total length of the cleat is 14 3/4”. The distance between bolt centers is 4 7/8”.
This cleat comes with two #10-1-1/2” self-tapping mounting screws. The distance between the bolt centers is 1 1/8."
This cleat cover box is made from cast aluminum with stainless steel hinge pins. The design allows for easy installation utilizing the cleat holes to mount the cleat cover box. It comes complete with a cylinder lock. Two extra-long 1/4 – 20NC stainless steel mounting screws are included.
This cleat cover box is made from cast aluminum with stainless steel hinge pins. The design allows for easy installation utilizing the cleat holes to mount the cleat cover box. It comes complete with a padlock. Two extra-long 1/4 – 20NC stainless steel mounting screws are included./span>
This 1/3” wide by 1” deep aluminum channel is designed to be used with the cleat cover boxes by providing additional protection 5’, 6’, 8’, or 10’ above the cleat box. The 5’, 6’, and 8’ models have an upper & lower hinge assembly and is secured to the pole with six #10-32NC stainless steel pan head screws (included). The 10’ model has upper, middle and lower hinge assemblies and is secured to the pole with nine #10-32NC stainless steel pan head screws (included). Cleat Cover Box sold separately.
This product is used in rope style internal halyard flagpoles. The mounted version is secured onto a 1 1/2" x 3 3/8” aluminum block with two #10-32NC stainless steel pan head screws. Both versions are supplied with two #10-32NC stainless steel mounting screws. Recommended maximum rope diameter is 5/16”
3 3/4" - For flags up to 8x12ft
4 3/4" - For flags 10x15ft and up
Typically used on residential flagpoles. This is standard snap for a 20ft flagpole.
This is our most popular snap. It has a length of 3 1/2".
Available in white or brown. The length of the snap is 3".
The length of this snap is 3 1/2".
This solid brass double snap is 4" in length.
This is the most durable clip available. Available in both 3 3/4" and 4 3/4" in length.
This is a great alternative while still be made of stainless steel. Available in 2 3/8" and 2 3/4" in length.
Snap covers are available in gray and brown. Length of 3 1/2" and 4 1/4" are available.