Available Finishes
Silver	Bronze	White	Black

This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the trick housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 2” outside diameter case nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The maximum halyard diameter for this pulley is 5/16”.