FREE SHIPPING! On orders of $100 * Some Exceptions Apply *
This winch handle is designed to be used with any of the stainless steel winches we sell.
This 5in diameter aluminum clear anodized ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
This high profile ‘Trumpet’ flash collar is generally used with flagpoles where a shoe base is welded to the bottom; however, this collar can be used on standard in-ground flagpole if a high profile look is desired. The wall thickness is .06” and is available for flagpoles with a 2 3/8” or 3” base diameter.
This flash collar has a wall thickness of .06” with an outside diameter of 16”. This flash collar is available for flagpole diameters of 5in – 8in.
This 6in diameter satin ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
**Special Website Pricing**
This adapter is used for mounting a truck that has a spindle threading of 1 1/4" NPT and the pole does not have a threaded top plug installed. The adapter is tapped 1 1/4" NPT and is designed to slip over the top of the pole and is secured by three 1/4"-20NC stainless steel set screws.
This handle is designed for the winch of a 5" diameter flagpole equipped with an M-Winch.
This series truck is cast aluminum, constructed with a 1 1/2" outside diameter cast nylon pulley on a 1/4" stainless steel axles. Designed to slip over the top of the flagpole and be secured with three 5/16"-18NC stainless steel set screws. The top is designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4"-20NC stainless set screw. The maximum halyard diameter for these pulleys is 5/16".
The 7lb counterweight is fabricated from 2” diameter steel and then coated with plastisol. This counterweight is also supplied with an eyebolt attached to each end.
This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The internal pulley assembly has a 1 1/2” outside diameter cast nylon pulley and the external pulley assembly has a 1 1/2” outside diameter cast nylon pulley for the 3 1/2" truck and 2" outside diameter cast nylon pully for the 3" truck. All are on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16”-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2”-13NC threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. The maximum halyard diameter for this pulley is 5/16”.
This 6in diameter aluminum clear anodized ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
This 9 1/4in wing span gold eagle ornament has a spindle threading of 1/2’’-13NC, and is 7 1/4in high. This ornament adds a patriotic element to the top of any flagpole.
This 12in wing span gold eagle ornament has a spindle threading of 1/2’’-13NC, and is 8 1/2in high. This ornament adds a patriotic element to the top of any flagpole.
The 14lb counterweight is fabricated from 2” diameter steel and then coated with plastisol. This counterweight is also supplied with an eyebolt attached to each end.
This Lock and Key set are designed for the M-Winch.
This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard size for this pulley is 5/16”.
This high profile ‘Trumpet’ flash collar is generally used with flagpoles where a shoe base is welded to the bottom; however, this collar can be used on standard in-ground flagpole if a high profile look is desired. The wall thickness is .06” and is available for flagpoles with a 3”-8" base diameter.
This 8in diameter aluminum gold ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
This 8in diameter satin ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
This series truck is cast aluminum, constructed with a 1 15/16” outside diameter cast nylon pulley on a 1/4” stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard size for this pulley is 5/16”.
This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the trick housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 2” outside diameter case nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The maximum halyard diameter for this pulley is 5/16”.
The 18' 1 5/8" diameter Fly it Flagpole Set is made out of aluminum. Flagpole consists of powder coated white painting four seamless aluminum tubing sections which swedge together providing a smooth exterior finish.
Contents:
This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4”-20NC on the 1 3/8” and 2” models & 5/16”-18NC on the 2 3/8” diameter model). The top is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard diameter for this pulley is 5/16”.
Constructed of 1/8” and/or 3/16” stainless steel aircraft cable incorporating a stainless steel swivel to minimize the effect or unraveling due to the rotation of the truck assembly. The lower cable section has a copper cable stop attached to one end for installation into a stainless steel winch. This cable stop can easily be removed if the winch is an “M”-type which does not require a cable stop. The upper cable section is supplied with a stainless steel thimble, 2 copper crimps, and two ball cable stops, however, because this section must be threaded through the truck assembly, these parts are not attached to the cable before shipment and must be attached in the field. These standard cable assemblies are designed for flagpoles with a winch installed at 5’ above grade.
This cleat comes with two 3/8”-16NC stainless steel slotted flat head screws. The total length of the cleat is 14 3/4”. The distance between bolt centers is 4 7/8”.
This 8in gold cross aluminum ornament has a spindle threading of 1/2’’-13NC, and is 4 1/4in high. This ornament adds a religious element to the top of any flagpole.
This 8in diameter aluminum clear anodized ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.